Page Multiple Tenants at Once
If you would require to page to all or to a certain number of tenants at once, you can create a very simple custom script. See our Custom Scripts page on Developer Resource Center.

2007-10-13

ScopServ Telephony 1.4.5, Asterisk 1.4.13 and Wanpipe 3.2.0
more...



Release Notes

This section explains some of the new features and significant improvements over previous versions. Note that bug fixes in previous update versions are also included in the current update version.

Network and Firewall 1.4.14

RevisionDateDescription
2152010-02-24
  • It now possible to use "Import from Provisioning" on DHCP Server when MySQL Replication is enabled.

Network and Firewall 1.4.13

RevisionDateDescription
2142010-02-11
  • Automatically stop the Network scheduled task script when the crond service is not running.
2132010-02-05
  • In Network -> DHCP configuration, DHCP Option 132 is described as 802.1P VLAN ID (Option 132) and Option 133 as 802.1Q L2 Priority (Option 133). 132 / VLAN should be 802.1Q and 133 / L2 Prio is 802.1P (Thanks Alain).

Network and Firewall 1.4.12

RevisionDateDescription
2122010-01-15
  • On initial server installation with more than one Network Interface, we now properly set the Hardware MAC Address on the configuration.
  • Move some parameters on the Advanced Options tab.

Network and Firewall 1.4.11

RevisionDateDescription
2112009-12-30
  • Added MySQL and Asterisk AMI ports to EPIC Cal Center / AMW Inbound Service.
2102009-12-22
  • Automatically fix permission, if wrong, on the Persistent Cron script.
2092009-12-21
  • Use a persistent script for cron task.

Network and Firewall 1.4.10

RevisionDateDescription
2082009-12-16
  • You can now restart Network service from Network -> General. The service will not be restarted automatically but the next minute.
2072009-12-15
  • Enhanced Configuration Wizard of Traffic Shaper to simplify configuration.
2062009-12-14
  • Replace all occurences of EPICAcce to EPICx.
2052009-11-29
  • Fix a problem with Firewall configuration, introduced by revision 195 (Thanks Dave).
2042009-11-24
  • Add port 8080/tcp on EPICAcce services in Firewall Configuration.
2032009-11-03
  • Add EPICAcce Contact Center ports (TCP/UDP) on Firewall configuration and Wizard.
2022009-11-03
  • Fix an undefined variable error message on Network Commit.
2012009-11-03
  • On Configuration Wizard, we now generate configurations files for DNS, Hosts and PPPoE.

Network and Firewall 1.4.9

RevisionDateDescription
2002009-10-13
  • Fix a problem on Firewall -> Advanced Rules when using PPPoE (WAN) interface.
1992009-10-07
  • Disable cache when loading Network and Firewall configuration on the hook function (when generating configuration).
1982009-10-06
  • Fix a problem with DynDNS configuration when using PPPoE (Thanks Xavier).
1972009-08-26
  • Remove hardcoded username/group on Network backend.
1962009-08-21
  • Add internal API function to generate Network and Firewall configuration files.
1952009-08-18
  • Only allow basic Network configuration on Unregistered version.
  • If only one NIC adapter is installed, do not display WAN options on Network -> Configuration.
1942009-08-13
  • Remove a deadlink to the SNMP Server manager since this module is not yet available (Thanks Dave).
1932009-08-09
  • Fix Branding/OEM code on the Network package.

Network and Firewall 1.4.8

RevisionDateDescription
1922009-07-22
  • Do not generate rules for disabled Port Forwarding in Firewall.
1912009-07-08
  • Remove hardcoded path on the Import Named script (currently unused).
1902009-06-25
  • Update French (France) translation
1892009-06-15
  • Update French (France) translation
1882009-05-21
  • If VLAN support is enabled on Local Network (LAN), then we now bind the DHCP server to the VLAN interface instead of physical interface. The server will now answer for requests only incoming from your VLAN.

Network and Firewall 1.4.7

RevisionDateDescription
1872009-05-08
  • Fix a small problem when generating Option-128 parameter on DHCP server.
1862009-05-08
  • Add a note on DHCP server configuration that the Time Offset setting is in seconds.
1852009-05-07
  • Fix a minor parsing error on Network backend.
1842009-05-07
  • Add support for Option-128 on DHCP server configuration. This option can be used by example to provision Nortel Unistim phones.
1832009-05-07
  • On Network Configuration, it now possible to set the Hardware Address (MAC) for each network interfaces (i.e. eth0 or eth1). This option allow to bind a network card to a specific interface and fix problems where WAN/LAN interfaces are swapped on server boot.
1822009-02-16
  • Add support for Full Search on API.
1812009-02-15
  • Add function on Network API for Search Content.
1802009-01-29
  • Fix a problem on Firewall -> Advanced Rules when both Source/Destination interface have same value (Ticket 7676C3).
1792009-01-25
  • Advanced Firewall rules are now working when running in Single Server firewall mode.
1782009-01-24
  • New options are now available on Firewall configuration when running in single server mode.
  • You can now enable Stealth router mode on Firewall.

Network and Firewall 1.4.6

RevisionDateDescription
1772009-01-13
  • Fix next-server parameter on DHCP server.
1762008-12-30
  • Fix a problem where the DNS key file used by BIND and DHCP is not always automatically generated.
1752008-12-30
  • On Network -> Configuration -> DNS Config, it now possible to specify a Local Domain Name and Search List for hostname lookup.
1742008-12-30
  • An option has been added on DHCP Server to set the Domain Name.
1732008-12-23
  • Some cleanup has been made on Reports -> Network -> General (Thanks Arun).
1722008-12-18
  • We now verify if the dhcpd.lease file is empty when looking on /var/lib/dhcp and /var/lib/dhcpd directories (Ticket E2D589).
1712008-12-08
  • The DHCP lease database location has change on CentOS 5.x so this fix now verify both location.

Network and Firewall 1.4.5

RevisionDateDescription
1702008-11-29
  • Fix a problem on Radius Server -> Proxy Realms where Auth. Host label is appearing twice.
1692008-11-19
  • A new button has been added on Configuration -> Dynamic DNS to test the configuration.
1682008-10-13
  • Fix a display error when the DHCPD leases file has not been created.
1672008-10-03
  • Fix grammar error in Static DHCP parameters.
1662008-09-18
  • Fix grammar/typo on Firewall and Traffic Shaper Config Wizards.
1652008-08-22
  • When we generate Network configuration and an interface is set to DHCP, display it between parenthesis instead of last specified IP (Ticket B445AA).
1642008-08-02
  • If a static IP Address is specified on the WAN interface, use this IP instead of the LAN IP Address on the /etc/hosts file (Ticket 252F3D).
1632008-07-21
  • Fix permissions/ownership on the BIND (named) directories.
1622008-07-17
  • On DNS resolver (/etc/resolv.conf), always set the primary DNS server to localhost (127.0.0.1) but only if the DNS server is enabled (Thanks Alessandro).
1612008-05-28
  • From the DHCP Server -> Static Hosts tab, you now have the ability to import all MAC addresses created on Telephony -> Phones Provisioning. DHCP Classes will be automatically created for each defined vendor (ex. Snom, Polycom, Aastra, Cisco, etc) including an entry on Static Host for every new MAC address. Existing informations will not be overwrited and only new entries will be created.
  • On DHCP -> Static hosts, you can now use a class/template instead of defined each settings on a per host basis.
1602008-05-28
  • A configuration error has been fixed on DNS Server when you uncheck the option 'Listen on all interface' and that no IP address are defined.
  • Lots of minor undefined variables warning messages has been fixed on Firewall and Radius Server on the Commit window.
1592008-05-26
  • Port Forwarding rules are now working when PPPoE is used as a WAN interface (Thanks Dave).
1582008-05-23
  • On DHCP Server -> Static Hosts, the Hostname must now be unique else the DHCP server will never start (Thanks Jacques).

Network and Firewall 1.4.4

RevisionDateDescription
1572008-04-16
  • Update French translation for Network package.
1562008-04-04
  • An Invalid argument error has been fixed when executing command-line (CLI) scripts (like crond/Scheduled scripts).
1552008-03-31
  • Fix a problem on Firewall where the Time Server (NTP) use UDP instead of TCP on port 123 (Ticket D427FC).
1542008-03-27
  • Updated Reports icon.
1532008-03-27
  • Updated network reports icon.
1522008-03-27
  • Updated module icons.
1512008-03-05
  • Now properly update network interfaces statistics in Realtime Monitor.

Network and Firewall 1.4.3

RevisionDateDescription
1502008-02-25
  • Optimized Realtime Monitoring code.
1492008-02-22
  • Minor fix to realtime monitoring for network interfaces.
1482008-02-21
  • Not needed to re-load system info library from realtime monitoring code, already loaded from Realtime Monitor script.
  • Use Horde_Array::arraySort to sort realtime infos.

Network and Firewall 1.4.2

RevisionDateDescription
1472008-02-21
  • If loopback interface, display as both LAN and WAN in Realtime Monitor.
1462008-02-21
  • Updated Realtime Monitoring code to use new update functions.
  • Fixed RRD graphics in System Overview and Memory windows.

Network and Firewall 1.4.1

RevisionDateDescription
1452008-02-14
  • Fix undefined variable error on Action List.
1442008-02-14
  • Oops, we must not 'exit' when the DHCPD leases file doesn't exist, this caused the Realtime Monitor to not work when no DHCP configured (Thanks Phillip).

Network and Firewall 1.4.0

RevisionDateDescription
1432008-01-04
  • When we commit DHCP configuration, display a warning message if the LAN interface is not configured in static IP address mode.
1422007-11-28
  • Add missing file for Network -> Static Hosts. This section allow to add custom entries in /etc/hosts file.

Network and Firewall 1.2.3

RevisionDateDescription
1412007-10-22
  • Ability to add hosts in the static table lookup for host names in Network -> Static Hosts. This is useful when DNS is not running, for example during system boot or for very small sites that are isolated from network. (Ticket: A6C3AC).
1402007-10-22
  • When the Firewall is disabled, add an option to enable IPv4 forwarding.
  • You can now turn on debug (syslog) for VPN connections.

Network and Firewall 1.2.2

RevisionDateDescription
1392007-08-27
  • Check if the cache directory for 'ddclient' (DynDNS Client) exist, if not, create it (Ticket: 386287).
1382007-08-22
  • DNS Server and VPN Client/Server modules are now available on the ScopServ Small-Medium Business (SMB) Edition.
1372007-08-09
  • Display the License Company or Name on the HTML Title.

Network and Firewall 1.2.1

RevisionDateDescription
1362007-06-19
  • When we use VLAN options on DHCP server, we must "quote" the value on the configuration file as they are string type.
1352007-06-19
  • Fix VLAN options (132-134) on DHCP server when using Classes and Static DHCP.

Network and Firewall 1.2.0

RevisionDateDescription
1342007-05-09
  • Now only parse date for connection and expiration date of DHCP clients in realtime window.
1332007-05-09
  • Add realtime files for this module.

Network and Firewall 1.1.5

RevisionDateDescription
1322007-04-17
  • Fix Pool configuration on DHCPD when using Classes.
1312007-04-17
  • Fix creation of Classes configuration on DHCP server.
1302007-04-13
  • Bugfixes in shaper commit module.
1292007-03-01
  • Bugfix on DHCP gateway option.
  • Add missing file.
1282007-02-27
  • Add 'Options' definition (132-135 and 150) for DHCPD configuration.
1272007-02-26
  • Now allow to set Gateway for DHCP server (By Daniel V.).
1262007-02-21
  • Add new options for Dynamic DNS configuration (Update Mode, Interval).
1252007-02-02
  • Don't force the Primary DNS on DHCP server if DNS is enabled.
1242007-02-02
  • Fix a typo on DHCP server configuration where Primary DNS value cannot be changed.
1232007-01-17
  • Fix some undefined variable errors.
  • Add new DHCP options for QoS/Diffserv to General settings.
1222007-01-17
  • Add new DHCP options for QoS and Diffserv (Option 132-134).
  • Cleanup old route configuration file when Commit (Redhat specific).